How to Choose an Automatic Welded Wire Mesh Machine for Your Product Range

Questions we hear from buyers

An automatic welded wire mesh machine should fit your wire, openings, width and product format. This line handles 3-6mm round or ribbed wire, line spacing from 50-300mm, cross spacing from 50mm, widths of 2000mm, 2500mm or 3000mm, and mesh lengths up to 50m. Use those limits to match the machine to reinforcing, industrial, fence, tray or basket mesh.

Match the machine to your mesh drawings

Start with the wire and opening pattern used in your regular products. Our automatic welded wire mesh machine handles 3-6mm round wire and ribbed wire (rebar). That range suits reinforcing mesh, concrete mesh, construction roll mesh, industrial meshwork, anti-climbing fences, equipment components, domestic appliance trays and shopping baskets.

The longitudinal opening can be set from 50-300mm, while the transverse opening starts at 50mm. Check both directions on your mesh drawings. The line is a suitable choice when the wire diameter, wire form and two opening dimensions all fall inside these ranges.

Select the working width and length

The working-width choices are 2000mm, 2500mm and 3000mm. Choose the largest product width in your planned range, then select a machine size that covers it. The 3000mm configuration fits a product mix that includes wider reinforcing or industrial mesh. A 2000mm configuration suits a narrower range when your products stay within that working width.

The maximum mesh length is up to 50m. This specification matters when you sell mesh in rolls or long sections. If your output includes panels, compare the required panel length with the machine's maximum length before you order. Reinforcing mesh and construction roll mesh are among the product applications supported by this line.

Welding speed is 40-75 times/min. Use this range when you estimate whether the line matches your planned production rhythm. Speed alone does not decide suitability, since the wire size, opening pattern, width and product length determine whether the machine fits the work.

Check the wire preparation arrangement

Line wire feeds automatically from coil. Cross wire is pre-straightened and pre-cut before loading. This arrangement suits a production process that can maintain coil-fed longitudinal wire and prepared cross-wire lengths as separate material streams.

State the wire form with your product requirements. Ribbed wire is relevant to reinforcing and concrete mesh. Round wire fits industrial meshwork and products such as trays, baskets and some fence formats. The machine suits these applications when the wire diameter remains within 3-6mm.

Review the controls and changeover needs

The machine uses a PLC with a color interface. Panasonic servo motors control mesh pulling, while thyristor and micro-computer timers regulate current and stroke at each welding point. Dual-motor feeding uses converter and servo control for welding pitch and tension.

Adjustable upper cylinders and electrodes support changes between mesh specifications. This is useful when one line must handle several opening patterns or product types. Match the machine to your recurring product range first, then assess how often your operators will change wire form, spacing or width.

Choose the machine for the application

Reinforcing mesh buyers should check ribbed-wire use, the 3-6mm diameter range and the required opening pattern. Industrial mesh buyers should check the same dimensional limits against the wire used for equipment components, trays or baskets. Fence buyers should compare the target fence mesh with the available width, spacing and length ranges.

The line also suits construction roll mesh, anti-climbing fences, domestic appliance trays and shopping baskets. Each application has a different combination of wire form, opening size, width and product length, so use the drawing for your most demanding product as the first sizing reference.